Site icon RDR-IT

Use Disks on a RAID Type Bus with Storage Spaces Direct (S2D)

By default, it is not possible to use disks on a Raid bus with S2D as shown in the image of the prerequisites below:

The following PowerShell command displays the bus type of the hard disks:

Get-Disk | select Number, FriendlyName, OperationalStatus, Size, PartitionStyle, BusType | sort Number | ft -AutoSize

The disks are configured as non-raid on the server (Idrac), even passing the PERC in HBA, the disks back as being on a bus type RAID.

It is possible to work around this limitation by adding a registry key.

On the server from which, the pool will be created, open the registry editor (regedit) and go:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ClusDIsk\Parameters

Add a new DWORD key named AllowBusTypeRAID with the value 1.

Restart the server.

Once the server reboots, it is possible to add disks on a RAID bus.

Source : https://support.microsoft.com/en-us/help/2839292/enable-support-for-clustered-windows-servers-using-clustered-raid-cont

Do not use in production, because all the disks will be attached to a single server.

Exit mobile version